The BÖHLER L718 AMPO is a hardenable nickel-base super alloy. This high heat-resistant material shows good strength properties at elevated temperatures up to 750 ° C, as well as excellent creep resistance up to 700 ° C. In addition, it shows excellent corrosion resistance and good printability. Essentially, the same properties can be achieved with printed components made from this powder as with bar material.
Particle size distribution 15 – 45 µm:
D10[µm] 18 – 24
D50[µm] 29 – 35
D90[µm] 42 – 50
Apparent density* ≥ 3.4 g/cm³
*Measurement of particle size distribution according to ISO 13322-2 (Dynamic image analysis methods);
Measurement of apparent density is based on ASTM B964 resp. DIN EN ISO 3923-1 and relates to our typical measured values
Achievable mechanical properties of printed part after heat treatment*:
Tensile strength (Rm) 1400 ± 50 MPa
Yield strength (RP₀,₂) 1180 ± 50 MPa
Elongation (%) 18 ± 3
Hardness 46 ± 3 HRc
*Mechanical strength according to heat treatment AMS5663 RT
Particle size distribution 45 – 90 µm:
Details on request
| SEL | EN | UNS | Market grade |
|---|---|---|---|
| 2.4668 | NiCr19NbMo/NiCr19Fe19Nb5Mo3 | N07718 | Alloy 718 |
| C | Cr | Mo | Ni | Ti | Al | Nb | B | Fe | |
|---|---|---|---|---|---|---|---|---|---|
| 0,04 | 19,00 | 3,05 | 52,50 | 0,90 | 0,50 | 5,13 | 0,00 | Rest |
