The BÖHLER L718 AMPO is a hardenable nickel-base super alloy. This high heat-resistant material shows good strength properties at elevated temperatures up to 750 ° C, as well as excellent creep resistance up to 700 ° C. In addition, it shows excellent corrosion resistance and good printability. Essentially, the same properties can be achieved with printed components made from this powder as with bar material.
Particle size distribution 15 – 45 µm:
D10[µm] 18 – 24
D50[µm] 29 – 35
D90[µm] 42 – 50
Apparent density* ≥ 3.5 g/cm³
* Measurement of particle size distribution is based on ISO 13322-2 (Dynamic image analysis methods);
Flowability and apparent density are based on DIN EN ISO 4490 resp. DIN EN ISO 3923-1.
Achievable mechanical properties of printed part after heat treatment*:
Tensile strength (Rm) 1340 ± 50 MPa
Yield strength (RP₀,₂) 1080 ± 30 MPa
Elongation (%) 29 ± 3
Hardness 44 ± 3 HRc
Impact toughness (ISO-V) 63 ± 5 J (a -60 °C)
*Mechanical strength according to heat treatment API6acra – 150ksi
Particle size distribution 45 – 90 µm:
Details on request
| Market grade | UNS | EN |
|---|---|---|
| Alloy 718API | N07718 | NiCr19NbMo/NiCr19Fe19Nb5Mo3 |
| C | Cr | Mo | Ni | Ti | Al | Nb | B | Fe | |
|---|---|---|---|---|---|---|---|---|---|
| 0,02 | 18,00 | 3,00 | Rest | 0,95 | 0,50 | 5,00 | 0,00 | 18,50 |
